<div>If you found a bug, please post here. Please add a description and pictures of what is going wrong. </div>

Grainstorm

Bug Reports

<div>hello, </div><div><br></div><div>first off, thank you. This app is wonderful</div><div><br></div><div>I believe there is a bug in the current update where the setting: Microphone - "Pause Playback when Active" does not work anymore when turned off. Playback is always paused, regardless of this setting. </div><div><br></div><div>Personally I quite enjoyed having the option to hear in headphones the output while recording input.</div><div><br></div><div>Tried with various settings</div>

Pause Playback when Active setting doesn't work

<div>Hi,</div><div>thank you for the report. Will be fixed in the next update.</div>

<div>When the + button is pressed the value is not increased and the value dialog can not be opened.</div><div><img src="https://i.ibb.co/RpjZ3rnS/Doobie-As-Dave-1000019325-thumb.webp" data-fullsize="https://i.ibb.co/RGncWvrz/Doobie-As-Dave-1000019325-full.webp" alt="1000019325" loading="lazy"></div><div>The + button is permanently selected after being pressed. - button does seem to get stuck too after pressing it 3 times.</div><div><br></div><div>Reproduceable on every module/effect which uses the increment/decrement control.</div>

Increment/decrement control does not work properly

<div>Thank you for lookin in to it :)</div>

<div>I've noticed that the rotary control of decimal types has an issue when entering more than two decimal points. After converting the three point decimal into a two point decimal, the increase / decrease buttons of the control skips some steps. This issue seems to be <strong>only</strong> present when the last digit of the three point decimal is a 5.</div><div><br></div><div>Steps to reproduce:</div><div>- Open the value dialog of any rotary control which binds to a decimal value (in my example its the Granulation Pitch knob).</div><div>- Enter a decimal value with three decimal points and a 5 as last digit (my value is 0.005).</div><div>- Notice that the value label of the control is displaying '0.00 Octaves'. If you open the value dialog the value shows '0.01'.</div><div>- Pressing the + increase value button:</div><div>1x: Value label shows '0.01 Octaves'</div><div>2x: Value label shows '0.03 Octaves'</div><div>3x: Value label shows '0.04 Octaves'</div><div>4x: Value label shows '0.05 Octaves'</div><div>5x: Value label shows '0.05 Octaves'</div><div>6x: Value label shows '0.06 Octaves'</div><div>7x: Value label shows '0.08 Octaves'</div><div>8x: Value label shows '0.09 Octaves'</div><div>9x: Value label shows '0.09 Octaves'</div><div>10x: Value label shows '0.10 Octaves'</div><div><br></div><div>Same behaviour with the - decrease value button.</div><div><br></div><div>It's only a minor issue but maybe fixable? 🚀</div>

Rotary control decimal rounding issue

<div>Since updating to version 1.9.5, I've noticed that some features/effects seem to be broken?</div><div><br></div><div>1. When tape mode is enabled the audio track start and end position pointer can't be changed. When trying to move the start or end pointer position, the pointer jumps back to its previous position.</div><div><br></div><div>2. When reversing a LFO, the LFO stops oscillating keeping the current wave position value as a flat line.</div><div><br></div><div>3. LOFI effect seems to be broken? Enabling the effect introduces clicking clearally breaking the audio.</div><div><br></div><div>By the way - love the new color of the play button 💚</div>

Bugs after updating to version 1.9.5

<div>Awesome have a great week 🙌🚀</div>